Orkot Marine Bearings

Orkot® Marine Bearings are manufactured from a unique synthetic composite incorporating solid lubricants to ensure outstanding wear life. With virtually no swelling in seawater and a very low thermal coefficient of expansion, the bearings provide dimensional stability in arctic and tropical seas. In addition, they do not corrode or promote corrosion of the housing and shaft and tolerate both edge loading and misalignment.

Orkot® TLMM Marine
This standard material incorporates a woven fabric reinforcement and solid lubricants within a thermosetting resin matrix. It can be used in conjunction with water and grease lubrication, running dry for limited periods.

Applications

Orkot® TLM Marine has been used in a large number of shipping and marine bearing applications.

Orkot® Marine Bearings are used in a large number of applications worldwide. Please select an application from the list below for more details on each type.
  • Rudder bearings
  • Stern shaft bearings
  • Stabiliser bearings
  • Rope guards
  • Fairwaters
  • Propeller shaft coupling covers
  • Submarine steering gear, tiller and dive plane bushes
  • Sonar equipment
  • Periscope guide bushes
  • Fairleads
  • Watertight door bushes

Rudder Bearings

  • Virtually no swell in water
  • Dry running capability
  • Protects housings from corrosion
  • Elasticity reduces the effects of hammering
  • Tolerant to misalignment and shaft deflections
  • Raw material tubes available from stock or can be manufactured in one or two working days
  • Easily machined on site
  • Classification approval for up to 15N/mm2
  • Can be fitted using a press, jacks or freeze fitted with liquid nitrogen

 

Stabilizer Bearings

  • Low noise and vibration characteristics
  • Classification approval for high loads
  • Can replace existing bearings
  • Tolerant to misalignment and shaft deflections

 

Stern Tube Bearings

  • TXM Marine offers exceptional performance in low speed with boundary lubrication
  • Water-lubricated
  • Classification approval for length to diameter ratios as low as 2/1
  • Can be fitted using a press, jacks or freeze fitted
  • Suitable for filtered or open water applications
  • Easily machined on site
  • Raw material tubes are available from stock or can be manufactured in one to two working days

 

Why us?

  • Items in Stock, Worldwide Shipment, Reliability, Fast Delivery
  • Attractive Prices, Quality, Expertise, Professional
  • 365 Days and 24/7 Service, Experience, Marine Expert

Request a Free Quote

[recaptcha]