A rod end (DIN ISO 12240-4) is generally a standardised, ready-to-install machine element used for the transfer of static and dynamic forces in connection with swivelling, tilting and turning movements.
We can offer you DURBAL, IGUS, SKF and Sealmaster rod ends. Our main supplier DURBAL offers two lines of maintenance required rod ends (Classic or Basic Line).
DURBAL Classic Line heavy-duty rod ends in accordance with DIN ISO 12240-4 consist of a housing with a pressed spherical plain bearing. These rod ends are maintenance-required.
The rod ends are available in the series K and E/EH. These DURBAL Classic Line rod ends in accordance with DIN ISO 8139 can also be combined with pneumatic cylinders.
The maintenance-required DURBAL rod ends of these series are primarily used in situations of alternating stresses or impact loads and are preferred in situations where swivelling movements are large. These rod ends are only suitable for certain rotational movements. The hard-chrome plated joint ball on series K moves on a bearing brass outer ring and the series E moves on a ball bearing steel outer ring and joint ball, which are hardened, ground and phosphated.
Mainly all sizes in this series consist of a forged part and tempered rod end housing. This makes these DURBAL rod ends extremely hardwearing. We also offer the maintenance-required rod ends series K in stainless steel.
DURBAL Basic Line standard-rod ends in accordance with DIN ISO 12240-4 consist of a heat-treated steel housing with a pressed spherical plain bearing. These rod ends are maintenance-required.
The rod ends are available in series K and E. These DURBAL Basic Line rod ends in accordance with DIN ISO 8139 can also be combined with pneumatic cylinders.
The series K rod ends of our Basic Line are suitable for use with axial loads and our series E are suitable for use with high alternating loads.
These standard products are distinguished by high precision and dependability as well as by an outstanding cost-benefit ratio.
More robust than typical deep groove ball bearings, they are highly customizable with the possible combination of many different components. This results in up to 10 000 possible configurations! Find the optimum configuration to deliver the kind of high performance you need – whether that’s exceptional durability, for example, or lower friction.
Designed especially for wind turbine generators, SKF Quiet Running deep groove ball bearings significantly reduce noise levels and structural resonance. They are less sensitive to variable operating conditions, can increase bearing service life and extend relubrication intervals.
Rolling Bearings
Mounted bearings and housings
Super-precision bearings
Slewing bearings
Marine Bearings – ORKOT
Maintenance products
Linear technology
Motion Plastics – IGUS
Lubrication systems & Pump systems
Sealing solutions
Power transmission solutions
Rod ends, spherical plain bearings
Couplings
Brake linings
Expansion joints
Shaft braking systems
Motors
Antivibration mountings
Bushings, thrust washers and strips